—————— 产品详情 ——————

CHANPINGXIANGQING

产品详情

产品名称:

泰磊TL196型抛光液

所属类别:高端产品 Upscale product
发布时间:2019-06-14 19:16:15
点击量:
产品详细介绍
  • 文字介绍
  • 图片介绍

是一款泰磊研发的最新的半透明液体。产品采用德国进口原料,极好的增加了止滑性,改善地坪原有色差,使色泽一致,达到油润光亮的极佳效果,并且产品通过半渗透半成膜的特性,很好的保证了长期使用后依然光亮如新,永不褪光。

使用方法:用喷雾器均匀喷涂于混凝土表面

用量:正常地面每公斤60平方以上

稀释比例:1:4兑水使用

规格:每桶20公斤

注意事项:请务必存储在阴凉干燥通风处,避免高温与冰冻的环境。

保质期:约1年


适用场地:

适用于原浆混凝土地坪、金刚砂耐磨地坪、水磨石地坪等以水泥基为主体的各类地坪,一般常应用在停车场、物流仓库、以及工业厂房等。也可在已经使用过的老旧环氧地坪或混凝土地坪上进行翻新处理,施工后旧地坪焕然一新,使其也可达到永远防尘,坚固耐磨的效果。

 

固化地坪的特点

1、密封性

混凝土密封固化剂能使硅酸盐为主体的水泥、混凝土等水泥基建筑材料密封成一个坚固的实体。通过渗透到混凝土内部,封堵混凝土毛孔,使混凝土变成一个坚固密封的实体。

2、硬化、耐磨

做固化剂地坪可以使混凝土变得坚硬、耐磨,施工后的地坪耐磨度以及莫氏硬度有着显著提高。随着使用时间的推移,处理过的混凝土硬度还会持续增加。

3、防尘、耐污

混凝土密封固化剂通过有效渗透,与混凝土中的游离氧化钙发生化学反应,在混凝土表面形成一个无尘、致密的整体,永久控制了混凝土灰尘从表面毛孔中析出,也可阻挡部分油污等进入混凝土中。

4、降低维护费用

使用密封固化剂地坪后,通过研磨抛光,地坪表面光滑耐污,不必再花费清洗打蜡等维护费用,只需要正常保洁即可保持美观,一劳永逸。

5、抛光、高光

密封固化剂地坪需要对混凝土表面采取物理抛光处理,抛光后混凝土表面更加致密、光亮。可使混凝土地面立刻变成洁净、高光泽度的完美地坪。

 


it is the latest type of translucent liquid developed by Tailei company. With the raw materials imported from Germany, the product greatly strengthens the anti-slip property and improves the original color difference to be consistent, which achieves the excellent brightening effect. And the product can be guaranteed for long-term use and appearance via semi-permeable and semi-film-forming characteristics.

 

Usage: spray evenly on the surface of concrete with sprayer or sprinkling pot.

Dosage: more than 60 square meters per kilogram for normal ground

Dilution Ratio: normally 1:4 with water

Specification: 20 kg per barrel

Notes: Store in a cool, dry and ventilated place to avoid high temperature or freezing.

Shelf life: about one year


Applicable Places:

It is suitable for all kinds of cement-based floors, such as raw mortar concrete floors, diamond abrasion-resistant floors, terrazzo floors, etc., commonly used in parking lots, logistics warehouses, and industrial plants. It can also be renovated on the old used epoxy or concrete floors. After construction, the old floors become bright and achieve permanent dust-proof, strong and wear-resistant effect.

 

Characteristics of Solidified Floor

1. Sealability

Cement-based building materials such as cement and concrete with Portland as the main body can be sealed into a solid entity by concrete sealing and solidifying agent. By penetrating into the concrete interior and sealing the concrete pore, the concrete becomes a solid and sealed entity.

2. Hardening and wear resistance

After solidified with the curing agent, the concrete becomes hard and wear-resistant. And the wear resistance and Mohs hardness can be significantly improved. As time goes on, the hardness of treated concrete continue to increase.

3. Dust-proof and pollution-resistant

Through effective infiltration, the sealing curing agent reacts with free calcium oxide in concrete, forming the dust-free, compact whole on the surface of concrete, which permanently controls the precipitation of concrete dust from the surface pore, and prevent oil pollution from entering concrete as well.

4. Reducing maintenance costs

After using the sealant curing agent, the floor surface becomes smooth and stainless by grinding and polishing. You don’t need to spend money on the maintenance such as cleaning and waxing. Only the normal cleaning is enough to keep the beautiful appearance.

5. Polishing and highlighting

For sealing and solidifying agent floor, physically polishing is necessary for the concrete surface. The surface is more compact and bright after polishing. You may enjoy the clean, bright and perfect floor immediately.



抛光液详情页-高端tl196_03.jpg



下一篇:返回列表
联系电话:0512-67688884   FAX:0512-65569690
办公地址:江苏省苏州市吴中区澄湖路888号恒润大厦B座2608室
厂址:江苏省无锡市宜兴屺亭化工园区荆邑北路

版权所有   泰磊新材料科技有限公司  All rights reserved. 苏ICP备19032288号